1-20
IC70
IC57
IC61
• Adjusted data (DVC section)
• IEEE1394 ID data
• HOUR METER data
• Blemish data
• Adjusted data (Camera section)
• User menu and Service menu settings data
• ERROR HISTORY
MAIN board
(MSD CPU)
MAIN board
(Camera CPU)
MIF board
(SYSCON CPU)
EEP-ROM
Board name
Memory data content
1.5.14
CPU version menu
Displays version of SYSCON CPU, Camera CPU , VTR CPU, ENC CPU, PACKAGE, FPGA2, FPGA3 and FPGA4.
1.5.15
EEP-ROM
(1) EEP-ROM and maintenance data
GY-HD100 is equipped with three EEP-ROMS for the purpose of data maintenance, and their contents are as per the following list.
When the circuit board or EEP-ROM is replaced, there will be no data in the EEP-ROM. When the unit is powered up, and the
SYSCON CPU recognizes that there is no data in the EEP-ROM, it automatically writes initial data into the EEP-ROM to initialize it.
The memory data shown in Table 1-5-15 will all be reset back to default settings, so it will be necessary to perform necessary
adjustments and settings again.
(2) IEEE1394 ID setting method
IEEE1394 equipped units have an ID, as defined by the IEEE1394 standard, stored in the internal EEP-ROM (IC 70. At the time of
production, the ID numbers allotted to each individual unit are written into the unit’s memory, and a sticker bearing the ID is affixed
inside the unit. When the EEP-ROM or MAIN circuit board is replaced, the ID needs to be set again.
Procedure for setting IEEE1394 ID
The ID is an 8 digit, hexadecimal code, with 1 high-end Byte being the model code, and 3 low-end Bytes being unique to the unit.
The model code is automatically initialized, so only the lower 3 Bytes of unique code need to be set manually. Go from Service
Menu
→
OTHERS Menu
→
MEM. EDIT (Memory Edit) to select the address in the ID data section and make the setting directly.
The 3 low-end Byte address is as follows. Make the setting while confirming the ID printed on the label (GY-HD100U/E ID: 4Fxxxxxx,
GY-HD101E ID: 4Exxxxxx) pasted on the inside of the GY-HD100 (See Fig. 1-5-15).
Fig. 1-5-14 CPU Version
Table 1-5-15 EEP-ROM Memory Data Content
IEEE1394 ID data : 4F
xx
xx
xx
(Indicates on the label of GY-HD100 inside.)
h
h
h
MEMORY Address number
“391” “392” “393” (Each 1 Byte ID data are stored for every one Memory Address number.)
S Y S
C P U
C 1 5 9 0
V 0 0 – 0 0
– – – V E R S I O N
C H E C K – – –
C A M C P U
C 1 5 9 1
V 0 0 – 0 0
V T R
C P U
C 1 5 9 4
V 0 0 – 0 0
E N C
C P U
L 1 1 8 7
V 0 0 – 0 0
P A C K A G E
C 1 6 1 5
V 0 0 – 0 0
F P G A 2
C 1 5 9 5
V 0 0 – 0 0
F P G A 3
C 1 5 9 6
V 0 0 – 0 0
F P G A 4
C 1 5 9 7
V 0 0 – 0 0
P A G E
B A C K
Software version
