No.
Item
Reference picture/drawing
Procedure
2-17
11
$
Reel disk (SUP) assembly,
%
Reel disk (TU) assembly,
&
Control plate,
^
Prism
<Removal>
1) Pull up each assembly to remove it. The control
plate can be removed by sliding it toward the left
as shown by the arrow.
2) Remove the screw (S2) to remove the prism.
<Attaching>
1) Reverse the removal procedure.
Fig. 2-7-11
12
*
Guide rail (TU) assembly,
(
Guide rail (SUP) assembly
Fig. 2-7-12(a)
<Removal>
Guide rail (TU) assembly:
1) Remove the 4 screws (S2) and remove the assem-
bly.
Guide rail (SUP) assembly:
1) Remove the screw (S2) and remove the assembly.
<Attaching>
1) Return the guide pole fully to the unloading posi-
tion, and attach the assemblies by reversing the
removal procedures. When attaching, place the
alignment markings of the two gears so that they
face each other. (See Fig. 2-7-12(b).)
Fig. 2-7-12(b)
14
(L12)
(L12)
17
15
11
16
19
20
(S2)
21
(S2)
24
(S2)
22
(S2)
18
(L13)
23
(S2)
19
18