No.
Item
Reference picture/drawing
Procedure
2-20
16
¢
Encoder gear,
∞
Main cam ,
§
Arm gear 1 assembly,
¶
Centering arm assembly
<Removal>
1) The main cam can be removed by removing the
washer (W1). As the cam gear is engaged at the
rear of the main deck assembly while the phase is
aligned, deviate the phase in the direction of the
arrow before removal. (See Fig. 2-7-16(b).)
Fig. 2-7-16(a)
Fig. 2-7-16(b) Removing the Centering Arm
Assembly
¶
<Attaching>
1) Align the phase by referring to Figs. 2-7-16(c) and
2-7-16(d), then attach the ass’ies reverse the re-
moval procedure.
Align the phases of the arm gear 1 assembly
§
and centering arm assembly
¶
, then align those
of the arm gear 1 assembly
§
and centering
arm assembly
¶
, attach the gear by fitting the
bosses into the cam groove below, and fit the
slit washers.
36
35
(W1)
Collar
34
37
34
35
Phase alignment
Phase alignment
Å
Marking
35
37
36
Phase
alignment
Phase alignment
Phase
alignment
37
Phase alignment
Fig. 2-7-16(c) Attaching the Rotary Encoder Assembly
¢
Fig. 2-7-16(d) Attaching the Main Cam
∞
Align the phase of the main cam
∞
, then attach by aligning the red-
colored markings
Å
(on 2 gear teeth) inside
Q
.
