Juniper JUNOSE 11.3, Руководство по настройке

Страница: 351 / 632

•
Use the no version to set the threshold parameter to its default value (for rising, 90
percent of the maximum value of the resource; for falling, 1 percent of the maximum
value of the resource; for hold-down time, 300 seconds).
•
See resource if-type.
resource threshold
•
Use to disable the issuance of trap messages when the router reaches preset threshold
limits.
•
Example
host1(config)# resource threshold disable traps
•
Use the no version to reenable traps for resource threshold conditions.
•
See resource threshold.
Viewing Resource Threshold Information
The RTM allows you to view information about resource use on the router. The show
resource command displays statistical information about resources and their current
threshold configurations.
show resource
•
Use to display statistical information about resources and their current threshold
configurations.
•
Field descriptions
•
Resource Threshold Trap—Status (enabled or disabled) of the resource threshold
trap
•
type—Interface type
•
location—Location of the interface (system or slot location)
•
max capacity—Maximum capacity of the interface at either the system or slot level
•
current value—Current capacity of the interface at either the system or slot level
•
rising threshold—Rising threshold setting for the interface at either the system or
slot level
•
falling threshold—Falling threshold setting for the interface at either the system or
slot level
•
hold-down time—Hold-down time setting for the interface at either the system or
slot level
•
Example 1
host1#
show resource
Resource Threshold Trap: enabled
max current rising
type location capacity value threshold
321 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Managing the System