Juniper JUNOSE 11.3, Руководство по настройке

Страница: 560 / 632

aaa domain-map
•
Use to map a user domain name to a virtual router.
•
Examples
host1-0-1-90(config)# aaa domain-map juniper.net vrouter_1
host1-0-1-90(config)# aaa domain-map none vrouter__all_purpose
host1-0-1-90(config)# aaa domain-map DEFAULT vrouter_all_purpose
•
Use the no version to delete the domain map.
•
See aaa domain-map.
ip vrf
•
Use to create a VRF or access VRF Configuration mode to configure a VRF.
•
You must specify a route distinguisher after you create a VRF. Otherwise, the VRF will
not operate.
•
Example
host1-00-02-80:boston(config)# ip vrf vpn-A
•
Use the no version to remove a VRF.
•
See ip vrf.
telnet listen
•
Use to create a Telnet daemon to listen in a virtual router.
•
Example
host1(config)# virtual-router 3
host1:3(config)# telnet listen port 3223
•
Use the no version to delete the daemon.
•
See telnet listen.
virtual-router
•
From Global Configuration mode, use this command to create a virtual router or access
the context of a previously created virtual router or a VRF.
•
From Domain Map Configuration mode, use this command to map the VR to a user
domain name. Use the
no version in this mode to delete the VR parameter and assign
the default VR.
•
A VR name consists of 1–32 alphanumeric characters.
•
After you are in the context of a particular VR or VRF (indicated by the change in the
prompt), all subsequent commands you enter apply to that context until you exit the
context.
•
Use the no version of the command only to delete the VR and return the router to the
default VR. Issuing the command no virtual-router vrName.vrfName has no effect.
•
Issuing a no version of this command ( no virtual-router : vrfName or no virtual-router
vrName : vrfName ) that specifies an existing VRF displays only the error message:
Copyright © 2010, Juniper Networks, Inc. 530
JunosE 11.3.x System Basics Configuration Guide