Juniper JUNOSE 11.3, Руководство по настройке

Страница: 346 / 632

•
Use to copy a core dump file.
•
You cannot use wildcards.
•
You can copy core dump files only to network locations.
•
You cannot create or copy over files generated by the system; however, you can copy
such files to an unreserved filename.
•
Example
host1# copy fault.dmp host:/public/server1/fault.dmp
•
There is no no version.
•
See copy.
Capturing and Writing Core Dumps
You can capture and write a core dump to a file for an active or a standby SRP module
or the line modules. You can store the file on the file system or on a network host. The
SRP core dump files are stored on the respective SRP flash memory. The line module
core dump files are stored on the active SRP flash memory at the instance of the core
dump event. The core dump files are not synchronized between the active and the standby
SRP module. You can use the resulting information to help diagnose a problem or to
verify whether the core settings are correct (primarily for the network settings).
write core
•
Use to reboot the active SRP module, the standby SRP module, or the module in a
specified slot, and write the core dump to a file.
•
If you specify the force keyword, you are prompted for confirmation to reboot when
the router is in a state that can lead to loss of configuration data or NVS corruption.
NOTE: The force keyword enables you to specify a slot only if that slot is
an SRP module slot.
•
If you do not specify a reason, Write Core is the default reason recorded in the reboot
history.
•
Example 1—Prompts for confirmation to reboot
host1# write core force
•
Example 2—Reboots the module in slot 7 and writes a core memory file
host1# write core slot 7
•
There is no no version.
•
See write core.
Copyright © 2010, Juniper Networks, Inc. 316
JunosE 11.3.x System Basics Configuration Guide