Juniper JUNOSE 11.3, Руководство по настройке

Страница: 275 / 632

information about CLI levels of access, see “Privileged-Level Access” on page 46 in
“Command-Line Interface” on page 27.
•
Set a password for this mode by using either the enable password or the enable secret
command in Global Configuration mode. This protects the system from any
unauthorized use.
•
Once a password is set, anyone trying to use Privileged Exec mode will be asked to
provide the password.
•
Example 1 (accessing Privileged Exec mode at the default level 10)
host1> enable
password:*******
host1#
•
Example 2 (accessing Privileged Exec mode at the highest level 15; a password is not
set for this example)
host1> enable 15
host1#
•
There is no no version.
•
See enable.
end
•
Use to exit Global Configuration mode or any of the other Configuration modes. You
may also use Ctrl+z to exit these modes.
•
Executing this command returns you to the User Exec mode.
•
Example
host1(config)# end
host1#
•
There is no no version.
•
See end.
exit
•
Use to exit the current command mode or the system when issued from the User Exec
mode.
•
Example
host1# exit
host1>
•
There is no no version.
•
See exit.
help
•
Use to display basic information about the interactive help system.
•
Example
245 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Managing the System