Juniper JUNOSE 11.3, Руководство по настройке

Страница: 93 / 632

NOTE: If you want to use the ? character as part of a string, such as a
hostname or a regular expression, you must enter the following key sequence:
Ctrl+v+?. Otherwise, the CLI considers the
? to be a request for assistance
in completing the command.
help Command
Use the help command when you want to see a brief description of the context-sensitive
help system.
host1> help
Use the help options as follows:
?, or command<Space>? - Lists the set of all valid next keywords or arguments
partial-keyword? - Lists the keywords that begin with a certain character
string
partial-keyword<Tab> - Completes the partial keyword
host1>
Partial-keyword <Tab>
When you cannot recall a complete command name or keyword, type in the first few
letters, press Tab, and the system completes your partial entry. You must type enough
characters to provide a unique abbreviation. If you type a few letters, press Tab, and your
terminal beeps, then you have not typed enough characters to be unambiguous.
host1(config)# int<Tab>
host1(config)# interface
Using Command-Line Editing
This section provides information about the command-line editor.
Basic Editing
Here are a few basic command-line editing notes:
•
Case—Keywords are not case sensitive; that is, they can be entered in uppercase,
lowercase, or a mix of both. Filenames may be case sensitive. Local filenames are case
sensitive; remote filenames are case sensitive if the host system treats filenames as
case sensitive. Passwords are case sensitive.
•
Abbreviating keywords—You may abbreviate keywords using as few characters as you
want, as long as the characters provide a unique abbreviation.
• Executing a command—Always use the Enter key.
Command-Line Editing Keys
You can use several keys to edit the command line. Table 7 on page 64 defines the keys
for editing the command line. Arrow keys functions only on ANSI-compatible terminals,
such as VT100s.
63 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Command-Line Interface