Juniper JUNOSE 11.3, Руководство по настройке

Страница: 285 / 632

Table 32 on page 255 describes the categories of router settings and the type of information
displayed for each category.
Table 32: Categories of Router Settings
Configuration Displayed Category
Authentication, authorization, and accounting (AAA) settings, such as
the default authentication protocol and the RADIUS accounting server aaa
Address assignment settings for Dynamic Host Configuration Protocol
(DHCP) and the local address server address-assignment
Flow management settings, such as firewalls, Network Address
Translation (NAT), and IP flow statistics flow-management
Physical interfaces (types and specifiers); this is the only category that
displays information about interfaces interfaces
Internet protocols, such as Border Gateway Protocol (BGP) and Open
Shortest Path First (OSPF) ip-protocols
Link-layer settings, such as bridged interfaces and link-layer interface
types link-layer-forwarding
Router management settings, such as the CLI, bulk statistics, and Telnet management
Physical layer protocols, such as DS1, DS3, and SONET/SDH physical-layer-protocols
Policy settings, such as policy lists, classifier groups, and rate-limit
profiles policy
Quality of service (QoS) settings, such as traffic class, drop profile, and
scheduler profile qos
System-level settings, such as timing, logging, and redundancy system
Tunneling protocols, such as IP Security (IPSec), Multiprotocol Label
Switching (MPLS), and Layer Two Tunneling Protocol (L2TP) tunneling
Many of the categories described in Table 32 on page 255 contain subcategories of router
settings. For example, you can specify
show configuration category management cli
to display only the configuration for the CLI. To display the names of subcategories that
you can specify for each category, issue the
show configuration category categoryName
? command.
You can combine the category keyword with the virtual-router keyword to display the
current configuration of specific settings for a virtual router.
255 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Managing the System