Juniper JUNOSE 11.3, Руководство по настройке

Страница: 472 / 632

•
InSlot—For certain flows detected on egress, the possible ingress slot of the flow
•
Rate (pps)—Rate of the flow
•
Peak Rate (pps)—Peak rate of the flow
•
Time Since Create—Time since the flow was determined to be suspicious, in
hh:mm:sec format
•
Example
host1(config)# show suspicious-control-flow-detection flows
Suspicious Flow Detection System Flows
Peak Time
In Rate Rate since
Interface Protocol MAC address Slot (pps) (pps) Create
----------------- ------- ------------ ----- --- ------- -------
GigabitEthernet 1/0/7 Ethernet ARP 0000.0100.0002 --- 1000030 1000050 00:00:32
*group 3 slot 1 EthernetArpMiss 0000.0100.0003 --- 1000 3000 00:10:10
•
See show suspicious-control-flow-detection flows.
show suspicious-control-flow-detection info
•
Use to display information about suspicious flows.
•
You can specify the following keywords:
•
delta —Displays statistics for the current baseline
•
brief —Displays only suspicious information
•
slot —Displays information for the specific slot
•
Field descriptions
•
Protocol Information
•
Protocol—Control protocol of the flow
•
State
•
OK—Protocol is currently not receiving an excess amount of traffic.
•
Suspicious—Protocol detected as receiving an excess amount of traffic within
the last backoff time in number of seconds.
•
Transitions—Number of times this protocol or priority has transitioned to the
suspicious state
•
Priority Information
•
Priority—Priorities map to a specific queue and color; priority groups are Hi-Green,
Hi-Yellow, Lo-Green and Lo-Yellow.
•
State:
•
OK—Protocol is currently not receiving an excess amount of traffic
Copyright © 2010, Juniper Networks, Inc. 442
JunosE 11.3.x System Basics Configuration Guide