Juniper JUNOSE 11.3, Руководство по настройке

Страница: 224 / 632

•
PrimaryXfers—Number of times the bulk statistics collector has attempted a data
file transfer to a primary server
•
PrimaryFails—Number of primary server transfer failures
•
SecondaryXfers—Number of times the bulk statistics collector has attempted a data
file transfer to a secondary server
•
SecondaryFails—Number of secondary server transfer failures
•
BulkStats Collector Information:
•
Index—Bulk statistics collector index number
•
CurrSize—Current size of the bulk statistics file in bytes
•
MaxSize—Maximum size configured for the bulk statistics file in bytes
•
Intrvl—Time interval between bulk collections in seconds
•
Mode—How often the collector is set up to collect statistics:
•
periodic—Collects statistics periodically
•
single-interval—Collects statistics once only
•
XferMode—Collect mode configured for the collector:
•
auto—Agent transfers file when interval expires
•
manual—Network management system or the user initiates transfers
•
onFull—Agent transfers file when it reaches the maximum size
•
State
•
inProg—Collector is properly configured and currently active
•
notInSvc—Collector has been decommissioned by a management client
•
notReady—Collector does not have enough configuration information to go
active
•
error—Configuration or operational error
•
Index—Bulk statistics collector index number
•
Primary-Receiver—Index number of the primary receiver to which the system
transfers data, if defined
•
Second-Receiver—Index of the secondary receiver to which the system transfers
data
•
Last Transfer Failure—Last time that the collector attempted to retrieve statistics
and was unsuccessful
Copyright © 2010, Juniper Networks, Inc. 194
JunosE 11.3.x System Basics Configuration Guide