Juniper JUNOSE 11.3, Руководство по настройке

Страница: 274 / 632

•
Example 2
host1# configure
Configuring from terminal or file [terminal]? file
File name: system1.scr
Proceed with configure? [confirm]
host1(config)#
•
There is no no version.
•
See configure.
disable
•
Use to exit Privileged Exec mode and return to User Exec mode.
•
Use to move to a lower Privileged Exec mode level without returning to User Exec
mode. Specifying a privilege level after the
disable command changes the Privileged
Exec mode to the lower level that you specify; you do not return to User Exec mode.
•
Example 1
host1# disable
host1>
•
Example 2
host1# show privilege
Privilege level is 10
host1#
disable 5
host1# show privilege
Privilege level is 5
•
There is no no version.
•
See disable.
do
•
Use to issue an Exec mode command from any CLI configuration command mode.
•
Example
host1(config)# do show configuration | begin interface
•
The do command functions the same as the run command.
•
There is no no version.
•
See do.
enable
•
Use to move from User Exec to Privileged Exec mode.
•
Privileged Exec mode allows you to access all other user interface modes. From here
you can configure, monitor, and manage all aspects of the router.
•
You can access the Privileged Exec commands using one of 16 levels of command
privilege. If you do not enter a privilege level and you are not accessing the router
through a RADIUS authentication account, the default CLI access level is 10. For
Copyright © 2010, Juniper Networks, Inc. 244
JunosE 11.3.x System Basics Configuration Guide