Juniper JUNOSE 11.3, Руководство по настройке

Страница: 82 / 632

Example 8 reverts one privilege group membership to its default setting. Prior to the
execution of this command, the following group memberships were in place:
reachable member group
12,0 12 8
0 -- 9
9,0 9 10
10,9,0 10 11
11,10,9,0 11 12
Reverting privilege group 9 to its default gives it one member: privilege group 8. This
creates the circular dependency: 8 contains 12, 12 contains 11, 11 contains 10, 10 contains
9, and 9 contains 8.
Example 9
host1(config)# no privilege-group membership
In Example 9, privilege group membership reverts to the default setting. All privilege
groups revert to hierarchical settings: 15 contains 14, 14 contains 13, 13 contains 12, and
so forth. Privilege group 0 is reachable from every privilege group.
Example 10
host1(config)# no privilege-group membership 7
In this example, one privilege group membership reverts to its default setting. Privilege
group 7 contains group 6.
Example 11 host1(config)# no privilege-group alias
In Example 11, all alias settings are removed.
Example 12
host1# show privilege group
privilege privilege directly all
group group reachable reachable
alias groups groups *
---------- ---------- -------- -----------------
0 minUser -- --
1 -- -- 0
2 -- 1 0 1
3 -- 2 0 1 2
4 -- 3 0 1 2 3
5 basicUser 4 0 1 2 3 4
6 dailyTroll 5 0 1 2 3 4 5
7 weekendAdmin 1 0 1
8 -- 14 0 14
9 -- -- 0
10 dailyAdmin 6 0 1 2 3 4 5 6
11 -- 5 0 1 2 3 4 5
12 -- 5 0 1 2 3 4 5
13 LI 10 0 1 2 3 4 5 6 10
Copyright © 2010, Juniper Networks, Inc. 52
JunosE 11.3.x System Basics Configuration Guide