Juniper JUNOSE 11.3 Скачать руководство пользователя страница 484

Страница: 484 / 632

pppoe dos-protection-group

•

Use to attach a PPPoE DoS protection group to an interface.

•

Example

host1(config-if)#

pppoe dos-protection-group group1

•

Use the

version to remove the attachment of the DoS protection group from the

interface.

•

See pppoe dos-protection-group.

priority burst

•

Use to set the burst size in packets for the priority.

•

Example

host1(config-dos-protection)#

priority Hi-Green-IC burst 32

•

Use the

version to return to the default value.

•

See priority burst.

priority over-subscription-factor

•

Use to set the oversubscription value for the priority rate limiter.

•

The oversubscription value and the priority rate are used to calculate the minimum
rate limits for port compression.

•

Allows an oversubscription of the priority rate because all protocols within a priority
are not generally used simultaneously.

•

Example

host1(config-dos-protection)#

priority Hi-Green-IC over-subscription-factor 100

•

Use the

version to return no oversubscription value.

•

See priority over-subscription-factor.

priority rate

•

Use to set the rate in packets-per-second for the priority.

•

Example

host1(config-dos-protection)#

priority Hi-Green-IC rate 6000

•

Use the

version to return to the default value of 0.

•

See priority rate.

protocol burst

•

Use to set the burst size in packets-per-second for the protocol.

•

The default value is one half the maximum rate in packets.

•

Example

host1(config-dos-protection)#

protocol IpLocalDhcpIc burst 65535

454

JunosE 11.3.x System Basics Configuration Guide

Содержание JUNOSE 11.3








































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JUNOSE 11.3

Отзывы:

Похожие инструкции для JUNOSE 11.3

Бренды по названию

Популярные бренды

Juniper JUNOSE 11.3, Руководство по настройке

Результаты поиска

Содержание JUNOSE 11.3

Отзывы:

Похожие инструкции для JUNOSE 11.3

Бренды по названию

Популярные бренды