Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 61 / 262

■
Equipment Identification Code—eic string for FDL
■
Line Identification Code—lic string for FDL
■
Frame Identification Code—fic string for FDL
■
Unit Identification Code—unit string for FDL
■
Facility Identification Code—pfi string for FDL
■
Port Code—port string for FDL
■
Generator Number—generator string for FDL
■
BERT test—Number of current test and total number of tests
■
Test interval—Length of the BERT test
■
status—Sync (controller is synchronized with remote device) or NoSync
(controller is not synchronized with remote device)
■
Sync count—Number of times the pattern detector synchronized with
the incoming data pattern
■
Received bit count—Number of bits received
■
Error bit count—Number of bits with errors
■
Number of valid intervals—Number of 15-minute intervals since the line
module was last powered on or reset
■
Time elapse in current interval—Statistics are reported in 15-minute intervals
■
Errored seconds—Number of errored seconds encountered by a T1 in the
current interval
■
Severely errored seconds—Number of severely errored seconds encountered
by a T1 in the current interval
■
Severely errored frame seconds—Number of severely errored framing
seconds encountered by a T1 in the current interval
■
Unavailable seconds—Number of unavailable seconds encountered by a T1
in the current interval
■
Clock slip seconds—Number of clock slips encountered by a T1 in the current
interval
■
Path code violations—Number of coding violations encountered by a T1 in
the current interval
■
Line errored seconds—Number of line errored seconds encountered by a
T1 in the current interval
■
Bursty errored seconds—Number of bursty errored seconds encountered by
a T1 in the current interval
Monitoring Interfaces
■ 35
Chapter 1: Configuring Channelized T3 Interfaces