Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 66 / 262

Number of valid interval - 3
Time elapse in current interval - 756
Ds3 Current Interval Counters
C-bit errored seconds = 0
C-bit severely errored seconds = 0
C-bit coding violations = 0
Unavailable seconds = 0
Invalid seconds = 0
Ds3 Last Interval Counters
C-bit errored seconds = 0
C-bit severely errored seconds = 0
C-bit coding violations = 0
Unavailable seconds = 0
Invalid seconds = 0
Ds3 24 Hour Total Counters
C-bit errored seconds = 1
C-bit severely errored seconds = 1
C-bit coding violations = 330
Unavailable seconds = 0
Invalid seconds = 0
■
Field descriptions for a T1 channel
■
DS1—Identifier of T1 channel
■
Number of valid intervals—Number of 15-minute intervals since the line
module was last powered on or reset
■
Time elapse in current interval—Number of seconds that have passed in the
15-minute (900-second) interval
■
Far End FDL Carrier bit—Status of FDL configuration on remote device
connected to T1 channel
■
set—FDL is configured for carrier mode
■
not set—FDL is not configured for carrier mode
■
Far End Equipment Identification Code—eic string sent by remote device
for FDL
■
Far End Line Identification Code—lic string sent by remote device for FDL
■
Far End Frame Identification Code—fic string sent by remote device for FDL
■
Far End Unit Identification Code—unit string sent by remote device for FDL
■
Far End Facility Identification Code—pfi string sent by remote device for
FDL
■
Far End Generator Number—generator string sent by remote device for FDL
■
Far End Port Number—port string sent by remote device for FDL
■
Errored seconds—Number of errored seconds encountered by a T1 in the
current interval
40 ■
Monitoring Interfaces
JUNOSe 10.0.x Physical Layer Configuration Guide