Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 194 / 262

■
For definitions of the MIB statistics for a T3 connections, see RFC
2496—Definitions of Managed Objects for the DS3/E3 Interface Types (January
1999).
■
For definitions of the MIB statistics for a T1 connections, see RFC
2495—Definitions of Managed Objects for the DS1, E1, DS2 and E2 Interface
Types (January 1999).
■
Field descriptions for a T3 interface
■
Far End MDL Carrier bit—Status of MDL configuration on remote device
connected to T3 interface
■
set—MDL is configured for carrier mode
■
not set—MDL is not configured for carrier mode
■
Far End Equipment Identification Code—eic string sent by remote device
for MDL
■
Far End Line Identification Code—lic string sent by remote device for MDL
■
Far End Frame Identification Code—fic string sent by remote device for MDL
■
Far End Unit Identification Code—unit string sent by remote device for MDL
■
Far End Facility Identification Code—pfi string sent by remote device for
MDL
■
Far End Generator Number—generator string sent by remote device for MDL
■
Far End Port Number—port string sent by remote device for MDL
■
Number of valid intervals—Number of 15-minute intervals since the line
module was last powered on or reset
■
Time elapse in current interval—Number of seconds that have passed in the
15-minute (900-second) interval
■
C-bit errored seconds—Number of C-bit errored seconds encountered by a
T3 in the current interval
■
C-bit severely errored seconds—Number of C-bit severely errored seconds
encountered by a T3 in the current interval
■
C-bit coding violations—Number of C-bit coding violations encountered by
a T3 in the current interval
■
Unavailable seconds—Number of unavailable seconds encountered by a T3
in the current interval
■
Invalid seconds—Number of seconds when statistics were not collected
■
Field descriptions for a T1 channel
■
DS1—Identifier of T1 channel
■
Number of valid intervals—Number of 15-minute intervals since the line
module was last powered on or reset
168 ■
Monitoring Interfaces
JUNOSe 10.0.x Physical Layer Configuration Guide