Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 187 / 262

Test Interval 1 minute(s), Running - Status is Sync
0 minute(s), 33 second(s) left in test interval
Sync count = 1
Received bit count = 41472000
Error bit count = 0
Number of valid interval - 0
Time elapse in current interval - 0
Current Interval Counters
Errored seconds = 0
Severely errored second = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Clock slip seconds = 0
Path code violations = 0
Line errored seconds = 0
Bursty errored seconds = 0
Degraded minutes = 0
Line code violations = 0
24 Hour Total Counters
Errored seconds = 0
Severely errored second = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Clock slip seconds = 0
Path code violations = 0
Line errored seconds = 0
Bursty errored seconds = 0
Degraded minutes = 0
Line code violations = 0
■
See show controllers sonet.
show controllers sonet ds3
■
Use to display T3 statistics for the different layers in channelized SONET and
SDH interfaces. Figure 8 on page 113 shows the layers in the interface.
■
For definitions of the MIB statistics, see RFC 2496—Definitions of Managed
Objects for the DS3/E3 Interface Types (January 1999).
■
Specify an interface in slot / port format.
■
To view information for a specific controller in a layer, enter the specifier for the
controller and the type for the controller. For example, to view T3 controller 1
on path 1 on the interface 4/0, enter
show controllers sonet 4/0:1/1 ds3 .
■
To view information for all controllers above a particular layer, enter the specifier
for the layer and the type for the controller. For example, to view all DS3
controllers on the interface 4/0, enter
show controllers sonet 4/0 ds3 .
■
To view T3 statistics for a layer, specify the controller type, ds3 .
■
To view the configuration for a controller or all controllers in a layer, omit the
controller type.
■
Field descriptions
Monitoring Interfaces
■ 161
Chapter 4: Configuring Channelized OCx/STMx Interfaces