Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 191 / 262

host1# show controllers sonet 2/1 section
Current Section Interval Counters
Current status = No Defect
Errored seconds = 0
Severly errored seconds = 0
Severely errored framing seconds = 0
Coding violations = 0
Last Section Interval Counters
Errored seconds = 0
Severly errored seconds = 0
Severely errored framing seconds = 0
Coding violations = 0
■
Example 2—This example illustrates the behavior of the baseline section
interface sonet command. The examples show the MIB statistics of the section
layer before and after the command is issued.
host1# show controllers sonet 2/0 section total
Number of valid intervals - 0
Time elapsed in current interval - 192
Current Section Interval Counters
Current status = No Defect
Errored seconds = 68
Severly errored seconds = 68
Severely errored framing seconds = 2
Coding violations = 4018
Total Section Counters
Errored seconds = 68
Severly errored seconds = 68
Severely errored framing seconds = 2
Coding violations = 4018
host1# baseline section interface sonet 2/0
host1# show controllers sonet 2/0 section total delta
Number of valid intervals - 0
Time elapsed in current interval - 209
Current Section Interval Counters
Current status = No Defect
Errored seconds = 68
Severly errored seconds = 68
Severely errored framing seconds = 2
Coding violations = 4018
Total Section Counters
Errored seconds = 0
Severly errored seconds = 0
Severely errored framing seconds = 0
Coding violations = 0
■
Example 3—This example shows the MIB statistics for the line layer on interface
2/1.
Monitoring Interfaces
■ 165
Chapter 4: Configuring Channelized OCx/STMx Interfaces