Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 203 / 262

■
See ERX Module Guide, Table 1, Module Combinations for detailed specifications
of these modules.
■
See ERX Module Guide, Appendix A, Module Protocol Support for information about
the protocols and applications that Ethernet modules support.
For detailed information about the modules that support Gigabit Ethernet and
10-Gigabit Ethernet interfaces on the E120 router and the E320 router:
■
See E120 and E320 Module Guide, Table 1, Modules and IOAs for detailed
specifications of these modules.
■
See E120 and E320 Module Guide, Appendix A, IOA Protocol Support for information
about the protocols and applications that Ethernet modules support.
Numbering Scheme
When configuring or managing an interface, you must know the numbering scheme
for identifying an interface. The numbering scheme depends on the type of E-series
router that you have.
ERX-7xx Models, ERX-14xx Models, and the ERX-310 Router
Use the slot/port [ .subinterface ] format to identify Ethernet interfaces and
subinterfaces.
■
slot —Number of the slot in which the line module resides in the chassis.
In ERX-7xx models, line module slots are numbered 2-6; slots 0 and 1 are
reserved for SRP modules. In ERX-14xx models, line module slots are numbered
0–5 and 8–13; slots 6 and 7 are reserved for SRP modules. In an ERX-310 router,
line module slots are numbered 1–2; slot 0 is reserved for the SRP module.
■
port —Number of the port on the I/O module.
On the OC3-2 GE APS I/O module, you can configure only a Gigabit Ethernet
interface in port 2; ports 0 and 1 are reserved for OC3/STM1 ATM interfaces.
■
subinterface —Subinterface number of the protocol or VLAN subinterface.
For information about installing line modules and I/O modules in ERX routers, see
ERX Hardware Guide, Chapter 4, Installing Modules .
E120 Router and E320 Router
Use the slot/adapter/port [.subinterface] format to identify Ethernet interfaces and
subinterfaces.
Ethernet Interface Platform Considerations
■ 177
Chapter 5: Configuring Ethernet Interfaces