Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 186 / 262

■
Description—Text description or alias if configured for the interface
■
BERT test—Number of current test and total number of tests
■
Test interval—Length of the BERT test
■
status—Sync (controller is synchronized with remote device) or NoSync
(controller is not synchronized with remote device
■
Sync count—Number of times the pattern detector synchronized with
the incoming data pattern
■
Received bit count—Number of bits received
■
Error bit count—Number of bits with errors
■
Number of valid intervals—Number of 15-minute intervals since the line
module was last powered on or reset
■
Time elapsed in current interval—Reported in 15-minute intervals
■
Errored seconds—Number of errored seconds encountered by a T1 or an
E1 in the current interval
■
Severely errored seconds—Number of severely errored seconds encountered
by a T1 or an E1 in the current interval
■
Severely errored frame seconds—Number of severely errored framing
seconds encountered by a T1 or an E1 in the current interval
■
Unavailable seconds—Number of unavailable seconds encountered by a T1
or an E1 in the current interval
■
Clock slip seconds—Number of clock slips encountered by a T1 or an E1 in
the current interval
■
Path code violations—Number of coding violations encountered by a T1 or
an E1 in the current interval
■
Line errored seconds—Number of line errored seconds encountered by a
T1 or an E1 in the current interval
■
Bursty errored seconds—Number of bursty errored seconds encountered by
a T1 or an E1 in the current interval
■
Degraded minutes—Number of minutes that a T1 or an E1 line is degraded
■
Line code violations—Number of line code violations encountered by a T1
or an E1 in the current interval
■
Example—This example displays statistics for all the E1 lines on the interface
2/0.
host1# show controllers sonet 2/0 e1
E1 1/1/1
Description: boston111 e1
BERT test - 2 in 11
160 ■
Monitoring Interfaces
JUNOSe 10.0.x Physical Layer Configuration Guide