Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 150 / 262

■
Use the no version to restore the default setting, 2500 milliseconds.
■
See trigger delay.
Configuring Higher Layers
You must now configure the next layer on the interface: E1, T1, or T3. See “T1/E1
Configuration Tasks” on page 124 or “T3 Configuration Tasks” on page 130.
T1/E1 Configuration Tasks
Before you configure T1 or E1 on an interface, you must configure SONET or SDH.
See “SONET/SDH Configuration Tasks” on page 119.
To configure a T1 or an E1 over SONET or SDH on a cOCx/STMx interface:
1.
Configure a tributary for the path.
2.
(Optional) Assign a text description or an alias to the interface.
3.
Configure one of the following:
■
An unframed E1 line. (See “Configuring T1 and E1 Lines” on page 125.)
■
A T1 or an E1 line. (See “Configuring T1 and E1 Lines” on page 125.)
For detailed examples, see “Configuration Examples” on page 141.
path ds1|e1
■
Use to create and configure SONET tributaries, SDH tributaries, and T1 or E1 on
the path.
■
Example
host1(config-controller)# path 2 ds1 1/7/4 vt15
■
Use the no version to delete SONET and SDH tributaries.
■
See path ds1|e1.
path ds1|e1 description
■
Use to assign a text description or an alias to a T1/E1 over SONET/SDH VT layer
on channelized SONET and SDH interfaces.
■
You can use this command to help you identify the interface and keep track of
interface connections.
■
The description or alias can be a maximum of 80 characters.
■
Use “show controllers sonet ds1|e1” on page 159 to display the text description.
■
Example
host1(config-controller)# path 2 ds1 1/7/4 description nyc01
124 ■
Configuration Tasks
JUNOSe 10.0.x Physical Layer Configuration Guide