Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 128 / 262

■
Use to display statistics for the different layers in channelized SONET and SDH
interfaces. Figure 5 on page 78 and Figure 6 on page 79 show the layers in the
interfaces.
■
For definitions of the MIB statistics, see RFC 2558—Definitions of Managed
Objects for the SONET/SDH Interface Type (March 1999).
■
Specify an interface in slot/port format (ERX-14xx models, ERX-7xx models, and
the ERX-310 router) or slot/adapter/port format (E120 and E320 routers).
■
To view statistics for a layer, specify the type of layer.
■
To view all statistics for all sessions, specify the total keyword.
■
To view baselined statistics for all intervals, specify the delta total keywords.
■
Field descriptions
■
Current Interval Counters—Statistics for the current 15-minute interval
The following fields may appear in line, path, or section:
■
ES—Number of errored seconds encountered by a T1 or an E1 in an
interval
■
SES—Number of severely errored seconds encountered in an interval
■
UAS—Number of unavailable seconds encountered in an interval
■
SEFS—Number of severely errored framing seconds encountered in an
interval
■
(Code Violations)—Number of coding violations encountered in an
interval (BIP-B1, BIP-B2, BIP-B3)
■
RDI—Number of remote defect indications
■
AIS—Number of alarm indication signals
■
BERR-SF—Number of bit error rate signal failures
■
BERR-SD—Number of bit error rate signal degrades
■
LOS—Number of loss of signal alarms
■
LOF—Number of loss of frame alarms
■
LOP—Number of loss of pointers
■
UNEQ—Number of unequipped alarms
■
PLM—Number of payload mismatchs
■
Last Interval Counters—Statistics for the previous 15-minute interval
■
Current Far End Interval Counters—Statistics for the remote connection
associated with the SONET/SDH path in the current 15-minute interval
102 ■
Monitoring SONET/SDH Interfaces
JUNOSe 10.0.x Physical Layer Configuration Guide