Juniper JUNOSE 10.0.X PHYSICAL LAYER, Руководство по настройке

Страница: 93 / 262

■
MDL Transmit Idle-Signal—Indicates if the transmission is active or not active
(T3 only)
■
Equipment Identification Code—eic string for MDL (T3 only)
■
Line Identification Code—lic string for MDL (T3 only)
■
Frame Identification Code—fic string for MDL (T3 only)
■
Facility Identification Code—fic string for MDL (T3 only)
■
Equipment Port—port string for MDL (T3 only)
■
Unit Identification Code—unit string for MDL (T3 only)
■
Facility Identification Code—pfi string for MDL (T3 only)
■
Port Code—port string for MDL (T3 only)
■
Generator Number—generator string for MDL (T3 only)
■
BERT test—Number of current test and total number of tests (T3 only)
■
Test interval—Length of the BERT test
■
status—Sync (controller is synchronized with remote device) or NoSync
(controller is not synchronized with remote device)
■
Sync count—Number of times the pattern detector synchronized with
the incoming data pattern
■
Received bit count—Number of bits received
■
Error bit count—Number of bits with errors
■
Number of valid intervals—Number of 15-minute intervals since the T3 or
E3 module was last powered on or reset
■
Time elapse in current interval—Number of seconds that have passed in the
15-minute (900 second) interval
■
Errored seconds—Number of errored seconds encountered by an E3 (not
applicable for T3) in the current interval (this field is not present for T3
controllers)
■
P-bit errored seconds—Number of errored seconds encountered by a T3
(not applicable for E3) in the current interval (this field is not present for E3
controllers)
■
Severely errored seconds—Number of severely errored seconds encountered
by an E3 (not applicable for T3) in the current interval (this field is not present
for T3 controllers)
■
P-bit severely errored seconds—Number of severely errored seconds
encountered by a T3 (not applicable for E3) in the current interval (this field
is not present for E3 controllers)
Monitoring Interfaces
■ 67
Chapter 2: Configuring T3 and E3 Interfaces