PAGE 84 of 140
2.
Tighten the HT cable management clamp wing knob
(Fig. 187)
.
5.10.2. Cable Management Setup
1.
Open the HT cable management sleeving. Begin at the clamp end and start
placing the cabling in the sleeving
(Fig. 188)
.
2.
Follow the cable placement zipping the sleeving closed
(Fig. 189).
3.
Once the cable is placed the entire length of sleeving, bring the zipper from
the opposite end to meet at any point in the middle.
4.
When necessary, the two zippers may be opened to allow any cables to be
routed out of the sleeving.
Fig. 188 - Insert cables and hoses
Fig. 189 - Zip to close
Fig. 190 - Zip opposite end
Fig. 191 - Flexible routing