PAGE 48 of 140
5.6.5. Cable Retainer
Located at the on the side of the crawler, the cable retainer offers a means of
cable management for cables, hoses and tubes. Gently apply pressure to the
grooves of the cable retainer and lift
(Fig. 91)
. Route cables, hoses or tubes
through the retainer and then press the cable retainer down
(Fig. 92)
.
5.6.6. Manipulation Handle
The manipulation handle
(Fig. 93)
provides a means of orienting the scanner
direction. The handle can be used to set initial scanner direction as well as
occasional orientation correction. The manipulation handle is not intended as a
tool for constant adjustment during a scan operation.
The handle may be removed when additional scanner clearance is required.
Fig. 91 - Lift retainer by hand
Fig. 92 - Place cables and hoses then close retainer
Fig. 93 - Manipulation handle
