PAGE 53 of 140
DP0029 Rev 02.2
5.8.1.3 Probe Holder Left/Right Conversion
1.
Using the supplied 3 mm driver, unscrew the yoke
(Fig. 105).
2.
Position the yoke and arms to the opposite side of the probe holder
(Fig. 106)
.
3.
Loosen the arm clamp screw and the probe holder arm adjustment knob
allowing removal of the probe holder arms
(Fig. 107)
.
4.
Position the removed arms to the opposite sides of the yoke
(Fig. 108)
.
Fig. 105 - Remove yoke
Fig. 106 - Orient to opposite side
Fig. 107 - Remove probe holder arms
Fig. 108 - Reverse position around yoke
Fig. 109 - Position pivot buttons
Fig. 110 - Place arms back onto yoke