PAGE 21 of 140
DP0029 Rev 02.2
4.2. Tools
4.2.1. Included Tools
The included 3 mm hex driver
(Fig. 37)
is
suitable for typical
SKOOT HT
and probe
holder adjustments.
A 3/8 in wrench
(Fig. 38)
is provided to
remove and install probe holder buttons.
The included 3 mm flat driver
(Fig. 39)
is
useful for releasing the flaps of the Raster
Arm HT’s cable tray.
4.2.2. Optional Tools
Some specialized adjustments require tools that are not included with this kit.
Fig. 37 - 3 mm hex driver
Fig. 38 - 3/8 in wrench
Fig. 39 - 3 mm flat driver
Fig. 40 - 1.5 mm
hex wrench
Fig. 41 - 2 mm
hex wrench
Fig. 42 - 2.5 mm
hex wrench
Fig. 43 - 3 mm
hex wrench