PAGE 65 of 140
DP0029 Rev 02.2
5.8.3.4 Slip Joint Probe Holder Left/Right Conversion
To reverse the probe holder, follow these steps:
1.
Unscrew the yoke from the swing arm
(Fig. 155)
.
2.
Loosen the probe holder arm adjustment knob and arm clamp screw.
Slide the arms from the yoke
(Fig. 156)
.
3.
Flip the yoke 180° and reverse the probe holder arms
(Fig. 157)
.
4.
Place the pivot buttons on the inside of the probe holder arms
(Fig. 158)
using a 3/8 in wrench
(Fig. 38)
. Slide the arms onto the yoke and tighten
the probe holder arm adjustment knob and the arm clamp screw.
Fig. 155 - Unscrew yoke pivot screw
Fig. 156 - Remove arms
Fig. 157 - Flip yoke and reverse arms
Fig. 158 - Attach arms and move buttons