![background image](http://html1.mh-extra.com/html/jetcat/p1000-pro/p1000-pro_operating-instructions-manual_646131065.webp)
M
Ingenieurbüro CAT, M. Zipperer GmbH +49-7634-5056-800
Wettelbrunner Straße 6
65
79282 Ballrechten-Dottingen
www.jetcat.de
GERMANY
Instruction manual JetCat-PRO engines, 1.7 - V12.01V
Reset to Default Values
The ECU can be reset to default values by following:
Press and hold the „Select Menu“ key on the GSU, then switch on the ECU (receiver).
The LED’s indicate the following blink sequence:
LED
Blink Sequence
Standby
(yellow)
Pump running
(red)
OK
(green)
The display of GSU indicate simultaneously:
Release Key to „Learn RC“
While this sequence keep „SelectMenu“ button pressed, don’t release it !!!!
After a while (approx. 15 seconds) the LED’s indicates the following blink sequence:
LED
Blink Sequence
Standby
(yellow)
Pump running
(red)
OK
(green)
While this sequence hold the key „SelectMenu“don’t release it !!!!
Release the key not before the LED’s indicate following sequence:
LED
Blink Sequence
Standby
(yellow)
Pump running
(red)
OK
(green)
Simultaneously the display of GSU indicates:
“Release key to Reset System”
Now release the key to execute the reset.
After a reset, it is required to:
Learn in RC