![background image](http://html1.mh-extra.com/html/jetcat/p1000-pro/p1000-pro_operating-instructions-manual_646131027.webp)
M
Ingenieurbüro CAT, M. Zipperer GmbH +49-7634-5056-800
Wettelbrunner Straße 6
27
79282 Ballrechten-Dottingen
www.jetcat.de
GERMANY
Instruction manual JetCat-PRO engines, 1.7 - V12.01V
GSU Button Descriptions
Key
Explanation
Info
Directly displays the
Info
menu (Hotkey).
Run
Directly displays the
Run
menu (Hotkey).
Limits
Directly displays the
Limits
menu (Hotkey).
Min/Max
Directly displays the
Min/Max
menu (Hotkey).
Select Menu
When the
Select Menu
key is pressed and held, the
-
◄
- or
►
+
keys are used to select another
menu. When a desired menu is reached, release the
Select Menu
key, and your selection
becomes the currently displayed menu.
Change
Value/Item
When the
Change Value/Item
key is pressed, and held, the
-
◄
or
►
+
keys are used to change
the indicated value. If the value is admissible to change, a small arrow appears in the display
before the value. If the indicated value cannot be changed (e.g.: current RPM or
temperature), the display will indicate that the “Value/Item cannot be changed”.
Description of LEDs on the GSU
Please take the time to understand the table above especially the descriptions for the
Select Menu
and
Change Value/Item keys
. These are often used for viewing additional menus other than the
Hotkey menus and for changing ECU settings.
Color
Designation LED is ON
LED flashes
Yellow
Starter
Starter Motor engaged
---
Red
Pump
Fuel pump is on
Kerosene glow plug defective or engine power / data
cable is disconnected
Green
OK
Turbine running:
throttle control active
If the engine is running, the EGT is exceeding the
maximum temperature.
If the engine is off,
Slow Down
mode is active
Red
Ignition
Ignition (glow plug) is on
---
If the yellow
Starter
and green
OK
LED’s blink simultaneously, the battery is low and must be
recharged.