![background image](http://html1.mh-extra.com/html/jetcat/p1000-pro/p1000-pro_operating-instructions-manual_646131019.webp)
M
Ingenieurbüro CAT, M. Zipperer GmbH +49-7634-5056-800
Wettelbrunner Straße 6
19
79282 Ballrechten-Dottingen
www.jetcat.de
GERMANY
Instruction manual JetCat-PRO engines, 1.7 - V12.01V
JetCat PRO-Interface
By using the “JetCat-PRO” interface, not only can all PRO engines easily be used in RC-model applications, it provides a
ready-made solution, and easy interface point for educational and industrial applications.
It also provides full functionality of our JetCat Telemetry-Adapter if desired!
Furthermore, the PRO-Interface allows for an easy access point to connect other accessories such as:
One or two channel RC control (from receiver)
Telemetry output for: Jeti, Graupner Hott, Multiplex M-BUS and Futaba SBUS-2
RJ12 jack for connection of GSU
Air Speed sensor header
6 and 8 pin ERNI flat cable connectors (e.g. for connection of LCU / Mini GSU)
RS232 header for computer control
CAN-Bus header
Header to JetCat BMS (Battery Management System)
Cross check communication port (for interconnecting / synchronizing two engines).
3x Status LEDs
Analog and digital inputs for:
-
Power On/Off
-
Engine On/Off Control
-
Engine RPM command/ control via a directly connected potentiometer