![background image](http://html1.mh-extra.com/html/jetcat/p1000-pro/p1000-pro_operating-instructions-manual_646131050.webp)
M
Ingenieurbüro CAT, M. Zipperer GmbH +49-7634-5056-800
Wettelbrunner Straße 6
50
79282 Ballrechten-Dottingen
www.jetcat.de
GERMANY
Instruction manual JetCat-PRO engines, 1.7 - V12.01V
Manual advanced section
Smoker pump
The ECU can directly control a smoker pump for injection of smoke fluid (e.g. diesel oil) in the exhaust blast.
The function of the smoker pump can be defined in the “Limits menu”
(Parameter: „SmokerValve Ctrl“)
The possible option for the parameter „SmokerValve Ctrl” are:
Option
Description
DISABLED
The smoker pump/valve is not used,
always off!
Open if AuxSw=0
Smoke pump is activated if the AUX-Switch (3-Pos. switch) is brought into the
lower
position (“OFF”-Position) and the engine is running.
To be able to use this function it is necessary, that the AUX-channel is
activated, this is the parameter „AUX-channel func“ (see below) must not be
adjusted to „NOT USED“.
Open if AuxSw=2
Smoke pump is activated if the AUX-Switch (3-Pos. switch) is brought into the
upper
position (“AUTO-OFF”-Position) and the engine is running.
To be able to use this function it is necessary, that the AUX-channel is
activated, this is the parameter „AUX-channel func“ (see below) must not be
adjusted to „NOT USED“.
Attention!
Inject the smoke fluid rear the thrust tube to avoid flash fire of unburned fuel.
A one way valve inserted downstream of the smoker pump can help to avoid leaking of smoke fluid
when the smoke pump is not running.