![background image](http://html1.mh-extra.com/html/jcm/gamma-versus-m20/gamma-versus-m20_manual_640225055.webp)
GAMMA VERSUS MANUAL
55
COD. 1257066 Gamma VERSUS Manual v1.13
7.19 Flash and pre-flash function
Model
All
Associated
parameters
ID
Description
Type
P91 Pre-Flash
option
ON/OFF
P78...P7C OUT
XX
OUTPUT
PA1…PB0
(TL-CARD-V) OUT XXX
OUTPUT
P54...P5C Switch
X
SWITCH
P4C Flash
frequency
NUMERIC
P4D Pre-Flash
time
NUMERIC
Flash in Autoclose
ON/OFF
PDE
Pre-flash function mode
NUMERIC
Description
The flash and pre-flash function allows controlling a warning light.
Configuration
To enable the flash it is needed to configure any output to “Flash” value.
P78
to
P7C
configuration parameters allow to assign the “Flash” output to any available control
panel output by means of a VERSUS-PROG programming tool. In addition any TL-
CARD-V output can be also programmed as “Flash” output by means of
PA1
to
PB0
configuration parameters.
The flashing frequency can be configured by using the
P4C
configuration parameter.
This flashing frequency can take values from 0.1 to 5 seconds.
Regarding pre-flash function if it has to be enabled
P91
configuration parameter has to
be set to ON. If pre-flash function needs to be controlled by user without VERSUS-
PROG programming tools “Pre-flash ON/OFF” function can be assigned to any switch.
To configure the switch values
P54
to
P5C
configuration parameters can be used.
Pre-flash time value can be configured by using the
P4D
configuration parameter. This
parameter can take values from 0 to 60 seconds.
The pre-flash function takes into account the pre-flash mode that is configured using
the
PDE
parameter. The operating modes are:
Value 0: Pre-flash before the opening and closing of the door.
Value 1: Pre-flash just before the opening.
Value 2: Pre-flash just before closing.
There is a flash function during the autoclose time that is configurable throught the
configuration parameter
. If it is at on, flash is done during all the autoclose time.
Operating
After pre-flash/flash function is configured in normal operation it takes into account its
control. If pre-flash is enabled it executes flash during the configured time before start
an opening/closing sequence. After the door starts moving it keep flashing until the
door stops, except when the flash during autoclose time is active during the closing
maneuver.
Содержание GAMMA VERSUS M20
