JCM GAMMA VERSUS M20, Руководство пользователя

Страница: 42 / 111

GAMMA VERSUS MANUAL
42
COD. 1257066 Gamma VERSUS Manual v1.13
The P92 parameter is used in order to activate the Radiosens dynamic radio function.
This function allows to dynamically adjusting the RSENS transmitting radio power
according to the radio link quality. If this function is enabled and the radio link quality is
bad the RSENS transmitter battery can reduce its battery life faster.
As the Radiosens system is used as a wireless security system for closing maneuvers
it is also possible to define an inhibition zone for the last centimeters of the maneuver.
The inhibition zone is not compulsory for the Radiosens system as this system detects
the door impact against the ground and the Radiosens sensor memorizes this impact.
Afterwards the impact data will be taken into account during the normal operation.
Even so if user wants to inhibit the last centimeters of the closing maneuver he can do
it by configuring the
P53 parameter. This parameter can take values from 0 to 200. The
closing maneuver is divided into 200 sections or portions, and the parameter defines
the number of the portions where the Radiosens system will be not active. For example
if the parameter takes the 10 value this means that the last 10 portions of the closing
maneuver the Radiosens system will be inhibited. If we export this data to a 2-meter
door this means that the last 10 centimeters of the closing maneuver won’t take into
account the Radiosens activation.
Moreover because of the uncontrolled vibrations that are detected when the motor
starts closing the door, by default the Radiosens system is inhibited during the first 10
maneuver portions of the closing maneuver.
Besides being able to set the end zone of inhibition by parameter P53 , it is possible to
set it without the VERSUS-PROG programming tool during programming of the
maneuver.
If the Radiosens system is used, when the maneuver is
programmed 2 opening-closing sequences are performed. The first sequence
is performed by the user to program the travels of opening and closing. The second
maneuver is carried out automatically so that the Radiosens system
performs its
measurements. It is during the closing sequence of the second maneuver when the
user
can set the closing inhibition zone for Radiosens system. Using the
alternative button (START) of the control panel the user can specify the starting
point of the
inhibition zone during the closure. You can also use a
transmitter configured as an alternative for this indication. If instead, the user takes no
action during this automatically closing sequence, the inhibition zone will be set by
default. The indication of the starting point of the inhibition zone by the alternative
button (START) will only take effect when over 10% of the closing maneuver, in order
to avoid total inhibition of the maneuver.
It is possible to check the inhibition zones by means of the RSENS transmitter. During
the first 25 closing maneuvers, the RSENS transmitter red LED lights when the
Radiosens is inhibited. Therefore the LED is ON during the first 10 maneuver portions
and it is set to ON again when it enters to the last inhibition portions configured by
using the
P53 parameter. After the 25 maneuvers are reached the LED doesn’t lights
again unless battery is removed and replaced again.
P53 RADIOSENS
configurable
inhibition margin
Closing
maneuver is
divided into 200
steps
RADIOSENS fixed
inhibition margin (10
steps)