JCM GAMMA VERSUS M20, Руководство пользователя

Страница: 81 / 111

GAMMA VERSUS MANUAL
81
COD. 1257066 Gamma VERSUS Manual v1.13
9.2 Programming by radio
To enter programming, press the first two buttons on a transmitter that has already been registered on the
equipment. The equipment will issue a 1 sec. acoustic signal. On pressing any button on the new
transmitter, the equipment will issue another 1 sec. acoustic signal to indicate that it has been memorised.
The new transmitter will maintain the same channel configuration as the transmitter registered.
After 10 seconds without programming or by quickly pressing the programming button or pressing the first
two transmitter buttons, the equipment will exit programming mode, issuing two 1 sec. acoustic signals.
9.3 Reset
In programming mode, the programming button is held down for over 10 sec. The equipment will issue 10
short acoustic warning signals followed by others at a faster pace to indicate that the operation has been
successful. The equipment is now in programming mode. The pilot programming light will also follow the
acoustic indications by flashing.
After 10 seconds without programming or quickly pressing the programming button, the equipment will exit
programming mode, issuing two 1 sec. acoustic signals.