Operation Manual of INVT CHS100 AC Servo Drive 5 Running and operation
55
b) Basic parameter setting mode: used to set the basic parameters;
c) Gain and filtering parameter setting mode: used to set gain or filtering
parameters;
d) Expansion parameter setting mode: used to set the expansion parameters;
e) Auxiliary function mode: used for JOG control and to restore parameters to
default value.
Operation flow chart:
Fig. 5-8 Flow chart of front panel operation
5.2.2 Status display
When “Status monitoring mode” is selected by pressing
, the panel displays
“dP-xxx” (xxx represents identifiers of different parameters). At this time, you can press
or
to select the identifier of the parameter to be displayed. After the
Status
monitoring
Basic
parameters
Gain
parameters
Expansion
parameters
Auxiliary
functions
Hold down
for about
5s
Hold down,
forward-
rotating
Hold down,
reverse-
rotating
Select the digit to be
set with SHIFT key
Or