Operation Manual of INVT CHS100 AC Servo Drive 5 Running and operation
54
Fig 5-8
Schematic diagram of the keypad
Table 5-1 State of the 3-color indicator
Color
Function
Green Normal
running
state
Red Fault
alarm
state
Blue
The control board is powering on but the servo is not started
Table 5-2 Key function definition
Key
Key name
Function
MODE key
Used to switch between different
modes or return to previous menu
SET key
Used to enter next menu or execute
setting command
UP key
Used to select parameter upwards or
increase value
DOWN key
Used to select parameter downwards
or decrease value
SHIFT key
When setting a parameter, it is used to
select the position of the current digit
Operation modes:
There are 5 operation modes in total. You can switch among them with
key.
a) Status monitoring mode: used to display the values of the status parameters;
Manufacturer’s LOGO
POWER indicator of
the main circuit
3-color indicator
Six 8-bit Nixie tubes
5 operate keys