Intek Elite Version 8D, Инструкция по установке и программированию

Страница: 36 / 56

Page 36
user code the dialer will stop any further calls. If the alarm is not reset or kissed off, the dialer will
attempt to report the alarm/s again when the test time comes around. If you don
’
t wish this to
happen turn off all of the test days at P404E.
Option 3
Pager - Report alarm events using Arrowhead "Pager" format. This format utilizes Telecoms
’
026 pager
network or other public subscriber networks, etc, to send numeric messages to a compatible pager.
(NOTE :The client account number should not start with a
“
0
”
)
Option 4
Voice Dialer - If the optional voice board is fitted to the panel then selecting this option for the telephone
number will allow preset voice messages to be sent via the telephone following an alarm. If the alarm is
not reset or kissed off, the dialer will attempt to report the alarm/s again when the test time
comes around. If you don
’
t wish this to happen turn off all of the test days at P404E.
Option 5
4 + 2 (10 pps) - This option transmits a 4 digit account code followed by a 2 digit event code to a central
monitoring station. The handshake tone from the monitoring station must be 1400 hz and the transmit
tone from the panel will be at 1800hz at 10 pulses per second.
Option 6
4 + 2 (10 pps) - This option transmits a 4 digit account code followed by a 2 digit event code to a central
monitoring station. The handshake tone from the monitoring station must be 1400 hz and the transmit
tone from the panel will be at 1900hz at 10 pulses per second.
Option 7
4 + 2 (10 pps) - This option transmits a 4 digit account code followed by a 2 digit event code to a central
monitoring station. The handshake tone from the monitoring station must be 2300 hz and the transmit
tone from the panel will be at 1800hz at 10 pulses per second.
Option 8
4 + 2 (10 pps) - This option transmits a 4 digit account code followed by a 2 digit event code to a central
monitoring station. The handshake tone from the monitoring station must be 2300 hz and the transmit
tone from the panel will be at 1900hz at 10 pulses per second.
Option 9
4 + 2 (20 pps) - This option transmits a 4 digit account code followed by a 2 digit event code to a central
monitoring station. The handshake tone from the monitoring station must be 1400 hz and the transmit
tone from the panel will be at 1800hz at 20 pulses per second.
Option 10
4 + 2 (20 pps) - This option transmits a 4 digit account code followed by a 2 digit event code to a central
monitoring station. The handshake tone from the monitoring station must be 1400 hz and the transmit
tone from the panel will be at 1900hz at 20 pulses per second.
Option 11
4 + 2 (20 pps) - This option transmits a 4 digit account code followed by a 2 digit event code to a central
monitoring station. The handshake tone from the monitoring station must be 2300 hz and the transmit
tone from the panel will be at 1800hz at 20 pulses per second
Option 12
4 + 2 (20 pps) - This option transmits a 4 digit account code followed by a 2 digit event code to a central
monitoring station. The handshake tone from the monitoring station must be 2300 hz and the transmit
tone from the panel will be at 1900hz at 20 pulses per second.
Option 13
4 + 2 (DTMF) - This option transmits a 4 digit account code followed by a 2 digit event code plus a
checksum using DTMF signals to a central monitoring station. The handshake tone from the monitoring
station must be 1400 hz /2300 hz .
Note: P242E through P244E are as above but apply to Telephone # 2-4
PROGRAMMING TELEPHONE NUMBER REPORT OPTIONS
This block of addresses (P181E - P184E) are used to set the reporting options for each telephone number
P181E-Telephone #1 Options 1E Stop if Kissed Off - Default on
2E Monitor Call Progress - Default on
3E Blind Dial - Default off
4E Use Group Codes or Multiple Accounts - Default off
5E Send Restores - Default on
6E Send test Call to Monitoring Station - Default off
7E Spare - Default off
8E Spare - Default off