Ingrasys nastorage 12600 series Скачать руководство пользователя страница 157

Страница: 157 / 158

157

4. Disk Roaming from 4600U/T to 12600U rack-mount models:

4-1. Power down the 4600U/T system.

4-2. Remove all member drives belonging to a logical volume. Re-install them to the

drive trays of the 12600U series systems.

4-3. Install these member drives to the 12600U system.

4-4. If the 12600U system is online and running, move to the Storage > Volume page to

bring the volume online.

4-5. If the 12600U system is offline, power it on a

nd the volume is automatically brought

online later.

5. Faulty disk replacement Procedure:

5-1. If a disk drive fails in an online volume, replace it with a new disk drive. The system

will begin the online rebuild.

5-2. If a disk drive fails in an online volume, you can install the replacement drive in an

unused disk bay. You can then enter the volume management window and replace

the faulty drive with the new, replacement drive.

5-3. If multiple members of a volume have been removed, the system will automatically

bring the volume offline.

5-4. An offline volume, (meaning that when a system is powered down; or the members

of a volume moved to a different chassis), can have its member drives installed

in disorderly drive bay positions. The system will automatically detect the logical

volume information and the whereabouts of its members. The user can then bring

the volume online.

Содержание nastorage 12600 series































































































































































Результаты поиска

Содержание nastorage 12600 series

Отзывы:

Похожие инструкции для nastorage 12600 series

Бренды по названию

Популярные бренды

Ingrasys nastorage 12600 series, Руководство пользователя

Результаты поиска

Содержание nastorage 12600 series

Отзывы:

Похожие инструкции для nastorage 12600 series

Бренды по названию

Популярные бренды