Ingrasys nastorage 12600 series, Руководство пользователя

Страница: 14 / 158

14
IMPORTANT:
1. It is important to leave a clearance of 15cm to the rear side of the chassis. The clear-
ance is required to ensure an adequate airflow through the chassis to ventilate heat. A
5cm clearance is also required on both sides of the chassis.
To ensure normal operation, maintain ambient airflow. Do not block the airflow around
chassis such as placing the system in a closed cabinet.
2. For a RAID volume configuration, it is recommended you use hard drives of the same
model featuring the same capacity and rotation speed, even running the same version
of firmware.
2.1 Hardware Installation - 4600T
SATA hard disk(s) are user-supplied. The NAS server can readily accommodate most of
the off-the-shelf SATA hard drives. For the latest compatibility list, please check on our
website.
1. Use the included bezel key to open the front panel.
2. Use the included bezel key to unlock the bezel lock on drive trays.
3. Open the drive tray bezel by flipping the bezel latch to the side. The bezel lever will
spring open.
4. You can then remove the drive tray.
1
2
4
3
Bezel Lock
Bezel Latch
Bezel Lever