Illustra Flex Series Installation and Configuration Guide
92
8200-1456-01 D0
The separation of Discovery Mode and User Authentication allows the camera to be set up in a
configuration that suits requirements for the network and users. The preferred discovery method for
the camera is Illustra Connect, and this utilizes ONVIF discovery. It is therefore recommended that
ONVIF Discovery Mode is always enabled.
ONVIF Discovery Mode
Enable or disable ONVIF discovery on the camera.
Procedure 114 Enable/Disable ONVIF Discovery Mode
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Remote Access
from the
Security
menu.
The Remote Access tab displays.
3
Select the
ONVIF Discovery Mode
check box to enable ONVIF Discovery Mode.
OR
Deselect
ONVIF Discovery Mode
check box to disable ONVIF Discovery Mode.
The default setting is ‘Enabled’.
- End -
ONVIF User Authentication
To utilize ONVIF User Authentication, there must be at least one admin level user in the ONVIF
service.
Note:
When in Enhanced Security mode, editing ONVIF User Authentication requires the admin
account password.
Procedure 115 Enable/Disable ONVIF User Authentication
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Remote Access
from the
Security
menu.
The Remote Access tab displays.
3
Select the
ONVIF User Authentication
check box to enable ONVIF User Authentication.
OR
Deselect
ONVIF User Authentication
check box to disable ONVIF User Authentication.
The default setting is ‘Enabled’.
- End -
