Illustra Flex Series Installation and Configuration Guide
60
8200-1456-01 D0
4
Select the
One Touch
button. The camera refocuses to the zoom level selected for the
image. The video pane updates to display the new settings.
Exposure
Configure the exposure settings for the camera.
Procedure 58 Configure Exposure Settings
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Settings
tab from the
Basic Configuration
menu.
3
Select
to start the video stream if it is not already active.
4
Select the
Exposure Mode
from the drop-down menu:
• P-Iris
• Manual
5
Select the
Exposure Method
from the drop-down menu:
•
Full Picture Weighted
•
Upper
•
Lower
•
Center Weighted
• Spot
•
Left
•
Right
The default setting is Center Weighted.
6
Select the
Min Exposure
from the drop-down menu.
The default setting is 1/10000s.
7
Select the
Max Exposure
from the drop-down menu.
The default setting is 1/8s.
8
Select the
Exposure Offset (F-Stops)
from the drop-down menu.
The default setting is 0.
9
Select the
Max Gain
from the drop-down menu.
The default settingis 51db.
10
Select the
Frequency
radio button for either
50Hz
or
60Hz
.
The default setting is 60Hz.
11
Select or clear the check box for
Flickerless Mode
.
This feature is not selected by default.
• When you select
Flickerless Mode
, the minimum and maximum
exposure times are locked to 1/100 and 1/50 respectively (PAL) or
1/120 and 1/60 respectively (NTSC). This applies to all cameras ref-
erenced in this guide.
- End -
Procedure 59 Restore Exposure Defaults
