Illustra Flex Series Installation and Configuration Guide
88
8200-1456-01 D0
5
Select
Upload
.
You will be prompted to confirm that you would like to upload the HTTPS certificate.
6
Select
OK
to confirm the upload.
OR
Select
Cancel
.
- End -
Delete a HTTPS Certificate
If you delete the existing certificate it will be replaced by a temporary substitute. The current browser
session will be lost and you will be required to log back in to the camera Web User Interface.
Procedure 107 Delete a HTTPS Certificate
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
HTTP/HTTPS
from the
Security
menu.
3
Select
Delete
.
The camera displays a “Restarting HTTPS Service” page with a progress bar showing the
deletion progress.
4
When complete, the camera returns to the log in page.
- End -
IEEE 802.1x
The IEEE 802.1x security feature provides port based network access control i.e. securing corporate
networks from the attachment of unauthorized devices.
Authentication is carried out through use of the Extensible Authentication Protocol or EAP. Both
PEAP and TLS methods are supported.
Procedure 108 Configure IEEE 802.1x Security
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
IEEE 802.1x
from the
Security
menu.
The
EAP Settings
tab displays.
3
Select the
Enable IEEE802.1x
check box to enable IEEE802.1x security .
OR
4
Clear the
Enable IEEE802.1x
check box to disable IEEE802.1x security.
5
Select the
EAPOL Version
from the drop-down menu.
6
Select the
EAP Method
using the radio buttons.
7
Enter the EAP identity name in the
EAP Identify
textbox.
8
Select
Upload
to navigate to the
CA Certificate
location.The Choose file dialog displays.
