Illustra Flex Series Installation and Configuration Guide
8200-1456-01 D0
97
- End -
Test FTP Settings
Test the FTP settings that have been configured correctly.
Procedure 121 Test the FTP Settings
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
FTP
from the
Network
menu.
3
Select the
FTP
tab.
4
Select
Test
. A sample text file will be sent to the specified FTP destination to confirm that
FTP settings are correct.
- End -
SMTP
Configure the SMTP settings to allow e-mail alerts to be sent from the camera when an analytic alert
is triggered.
Note:
SMTP settings must be configured to enable email alerts when using analytics.
Procedure 122 Configure SMTP Settings
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
SMPT
from the
Network
menu.
The
SMPT
tab displays.
3
Check the
Enable SMPT
check box to enable SMPT. Text boxes on the tab become
available for entry.
Note:
When in Enhanced Security mode, enabling SMTP requires the admin
account password.
4
Enter the IP Address of the mail server in the
Mail Server
text box.
5
Enter the server port in the
Server Port
text box.
The default setting is ‘25’.
6
Enter the from email address in the
From Address
text box.
7
Enter the email address to send email alerts to in the
Send Email to
text box.
8
Select the
Use authentication to log on to server
check box to allow authentication
details to be entered.
OR
Clear the
Use authentication to log on to server
to disable authentication.
The default setting is ‘Disabled’.
