Illustra Flex Series Installation and Configuration Guide
98
8200-1456-01 D0
9
If ‘Use authentication to log on to server’ check box has been selected:
a
Enter the username for the SMTP account in the
Username
text box.
b
Enter the password for the SMTP account in the
Password
text box.
10
Select
Apply
to save the settings.
- End -
SNMP
The camera introduces support for the Simple Network Management Protocol making it easier to
manage on an IP network.
The SNMP support includes support for V2 and V3. Using V2 means no authentication is required to
access the data and results are unencrypted. V3 offers enhanced encryption and authentication
security features.
Procedure 123 Configure SNMP Settings
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
SNMP
from the
Network
menu.
3
Enter a location reference in the
Location
text box.
4
Enter an SNMP managing contact reference in the
Contact
text box.
5
If using
V2
:
a
Select the
Enable V2
checkbox.
b
Enter the authorized ID for reading SNMP data in the
Read Community
text box.
c
Enter the
Trap Community
.
d
Enter the
Trap Address
.
e
Select
Apply
.
OR
If using
V3
:
a
Select the
Enable V3
checkbox.
b
Enter the
Read User
.
c
Select the
Security Level
from the drop down menu:
- noauth:
No authentication / no encryption.
-
auth:
Authentication / no encryption. A user password is required. It is symmetrically
encrypted using either MD5 or SHA.
-
priv
: Authentication / encryption. A user password is required as is symmetrically
encrypted using either MD5 or SHA. A data encryption password is required as is sym-
metrically encrypted using either DES or AES.
d
Select the
Authentication Type
using the radio buttons.
e
Enter the Authentication Password
f
Select the
EncryptionType
using the radio buttons.
g
Enter the
Encryption
Password
