Illustra Flex Series Installation and Configuration Guide
8200-1456-01 D0
51
Procedure 43 Adjust the Brightness, Contrast and Saturation
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Additional
tab from the
Basic Configuration
menu.
3
Select
to start the video stream if it is not already active.
The video pane will display the current camera view.
4
Use the slider bars to adjust:
• Brightness
• Contrast
• Saturation
• Sharpness
• Hue
The values range from 0% to 100%. The video pane updates to display the new settings.
- End -
Procedure 44 Restore Picture Balance Defaults
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Settings
tab from the
Basic Configuration
menu.
3
Select
Defaults
to restore the default settings.
The default values are:
•
Brightness:
50%
• Contrast:
50%
• Saturation:
50%
• Sharpness:
50%
• Hue:
50%
- End -
White Balance
White balance, the ability to keep whites looking white, is normally compensated for automatically
using the default Auto White Balance setting.
Manual White Balance is available when specific color temperature settings want to be set and
preserved. This can be done using the red and blue slider adjustments set for optimal viewing.
Procedure 45 Configure Auto White Balance
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Additional
tab from the
Basic Configuration
menu.
