Illustra Flex Series Installation and Configuration Guide
8200-1456-01 D0
79
Motion detection can be turned on and turned off when required.
Procedure 91 Enable or Disable a Motion Detection Alert
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Analytics
from the
Events and Actions
menu.
3
Select the
Motion Detection
tab.
The Motion Detection Configuration pane displays.
4
Select the
Enable motion detection
checkbox to enable Motion Detection on the camera.
OR
Clear the
Enable motion detection
checkbox to disable Motion Detection on the camera.
5
Select
Apply
to save.
- End -
Blur Detection
The camera generates an alarm and then takes the action you specified during configuration when
the Blur Detection feature is enabled and the camera detects incidents that make the video image
blur, such as: redirection, blocking, or defocusing.
When you enable Blur detection, it has a polling period of roughly 1 minute.
A Blur Detection start fault is raised when blur has been detected at 60 successive polling periods of
1 second (up to 1 minute).
Event Logs
Event Log
When events are triggered the resulting alarms are displayed in the Event Log with the following
information:
•
No.
- details the event index.
•
Event
- this is listed as ‘MotionDetected’.
•
Date created
- the time and date when the motion detection was triggered.
•
Component
- internal software component that raised the fault for a motion detection alert.
This is listed as ANALYTICS.
•
Severity
- indicates how serious the fault is. Motion detection alerts list as ‘Warning’.
•
Detail
- extra information that supplements the motion detection alert.
•
Delete
- remove the motion detection alert notification from the fault table.
Procedure 92 Display Event Log
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
