Illustra Flex Series Installation and Configuration Guide
8200-1456-01 D0
113
- End -
Procedure 147 Unmount the MicroSD Card for Removal
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
SD Card Management
menu from the
Edge Recording
menu.
3
Select
Unmount
.
You are prompted to confirm the unmounting.
4
Select
OK
to confirm.
OR
5
Select
Cancel
.
Remove the SD card from the camera.
AVI clips are not available on the camera until the SD card has been inserted and mounted.
- End -
Record Settings
Select which video stream to use for alarm video and configure pre and post event durations for the
playable video clip. The camera can record video generated from MD, face detection and DIO
events.
Procedure 148 Configure Record Settings
Step Action
1
Select
Setup
on the Web User Interface Banner to display the setup menus.
2
Select
Record Settings
from the
Edge Recording
menu.
3
Select
Enable Record
to allow the camera to create a playable video clip.
OR
Deselect
Enable Record
to disable the feature.
4
If
Enable Record
has been enabled:
a
Select the required video stream from the Video drop-down menu.
Refer to Procedure 5-1 Configure the Video Stream Settings.
b
Select the Pre Event (secs) in seconds from the drop-down menu. Values range from 0
to 10.
The default setting is 5 seconds.
c
Select the Post Event (secs) in seconds from the drop-down menu. Values range from 0
to 10.
The default setting is 5 seconds.
5
Select
Apply
to save.
