Illustra Flex Series Installation and Configuration Guide
84
8200-1456-01 D0
- End -
Security Status
This section summarizes the communication protocols that are used and their status. The following
communication protocols can be enabled: HTTP, FTP, CIFS, Dyn DNS, SMTP, HTTPS, SNMP
V1/2, SNMP V3, uPNP, and SFTP.
Security Overview
Procedure 98 Enable/Disable Communication Protocols
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Security Status
from the
Security
menu.
3
Select the
Security Overview
tab.
4
Select or clear the
Protocols
check box to enable or disable that protocol.
5
Click
Apply
to save your settings
.
Note:
When in Enhanced Security, enabling/disabling individual protocols requires the
admin account password.
Any changes to individual protocol settings are logged in the Security Log.
Security Log
The security log records any changes made to the security mode or to an individual protocol.
Procedure 99 Display Security Log
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Security Status
from the
Security
menu.
3
Select the
Security Log
tab.
4
Select
Refresh
to refresh the log for the most up-to-date information.
- End -
Procedure 100 Filter the Security Log
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Security Status
from the
Security
menu.
3
Select the
Security Log
tab.
4
Enter the number of lines of the log file you would like to view in the
Lines (from the end of
the log file)
text box.
